Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

This menu allows to set up different options, which generally influence your work with your signature device. This is true for StepOver signature pads as well as third-party devices like Tablet-PCs, touch screens etc.

With the help of this drop down menu, you can impose limitations on eSignatureOffice when it comes to listing eligible signature devices either via automatic search (see previous options) or via manual search (see "Button: Automatic configuration"). This is especially useful, when multiple possible signature devices are connected to the computer but the choices are to be limited to prevent anyone from signing for example with the mouse cursor, when he should use only his StepOver signature pad. 

The different security levels are:

  • High: Only StepOver signature devices with an internal encryption function are shown here. This includes all currently available sign pads from the naturaSign and duraSign product ranges.
  • Medium: All StepOver signature devices will be shown, including older products without internal encryption.
  • Low: With this option, all connected, potentially usable signature devices will be listed, including tablet PCs (with their touch screens and pens), computer mice or devices by other manufacturers. Please take note, that using third-party devices might need another type of licence key than for using only StepOver devices. The demo version allows using all options.
    Image Removed Attention: Because of a wide range of possible different device specifications and different levels of quality when it comes to recording your signature's image, pressure and speed, StepOver cannot avouch the quality of signatures done with other devices than StepOver signature pads. Please contact your device manufacturer for your respective technical data.
    Image RemovedImage Added
    Click here to protect the settings below with a password.This button is available in all cathegories of the administration and allows to set a password to protect your settings from getting changed. You can do this for each menu separately or for all menus at once. 
    Inform user to connect his pad

    If this option is activated and eSignatureOffice can't find any eligible signature devices when starting a signature process, you will be prompted to connect a device.

    Check signature device on start

    If this option is activated, eSignatureOffice also searches for connected signature devices on startup and depending on your settings in the previous option ("Inform user..."), you will be prompted (or not).

    Security level
    Tablet PC support

    If this option is activated, connected tablet PCs will be shown in the list of eligible signature devices, too. Please take note, that you need another licence than the standard type, if you want to use this option instead of using only StepOver devices. Learn more about choosing your active signature device some lines below in the description of the button "Automatic configuration" (highlighted in blue).

    Other Wintab devices, e.g. ePadsIf this option is activated, connected Wintab devices will be shown in the list of eligible signature devices, too. Please take note, that you need another licence than the standard type, if you want to use this option instead of using only StepOver devices. Learn more about choosing your active signature device some lines below in the description of the button "Automatic configuration" (highlighted in blue).
    Deactivate Input Devices

    Please be aware, that with this option different types of devices will be deactivated, not activated!

    Those types, which are chosen here, will be ignored by the device search and not shown in the list. This offers the possibility to narrow down the list of eligible devices by hiding unwanted computer mice, pens or touch screens. This option will be explained further in the next point.

    Button: "Automatic configuration"

    Using this button, will - after a short search - list all available, connected signature devices, which are also allowed by your limitations (see previous options). An example picture with two sign pads and a computer mouse is shown to the right. 

    After choosing the desired signature device and confirming your choice by using the "Next" button, eSignatureOffice will automatically configure the connection to the chosen device and its settings. A short hint will be displayed for five seconds and then close automatically.

    Now your device is ready to use.

     

    Please be aware, that you can connect multiple signature devices to your computer simultaneously (in this example one mouse and two different types of StepOver signature pads), but you can always use only one device actively for your signatures! If you wish to change your choice, you have to repeat the process either as just described here via the administration menu oder by using "Options | Set signature device..." in your eSignatureOffice main menu.

    Image Removed

    Image Removed Attention: When using a tablet PC as signature device, setting it up can be a bit more complicated, because according to experience these devices sometimes offer a multitude of options, which aren't explained further and only differ in their device number as shown in the example screenshot to the right. In this example only one computer mouse and one StepOver sign pad are connected. The other three options are provided by the tablet PC itself. In consequence of this, some trial & error approach might be necessary: choose one of the options, which you deem correct and try to sign with the desired pen or touch device. If it works, you are done. If it does not work, you have to repeat the whole process with another choice until you find the correct device entry.

     

    To switch between different signature devices, you don't have to use the administration menu each time, but you can use "Options | Set signature device..." in your eSignatureOffice main menu instead.

    Image Removed
    Save signature device settings in the registry

    Activate this check mark before using the button "Automatic configuration" and eSignatureOffice will save the information about your chosen signature device in your operating system's registry. This way, other applications like the Word plugin or maybe your own applications don't have to search for the device on their own, but they can read the information from the registry.

    Save signature automatically after X seconds.

    If this option is chosen, eSignatureOffice uses an automatic timeout counter, which starts after registering the last input on the signature device. By default, two seconds are preset here, which, according to experience, offers enough time to switch between different words or add lines or points to your signature. It's recommended to set this timer not too low in order to prevent a premature end of your signature process as well as to offer the signer enough time to push the "Repeat" button when being not satisfied with the signature.

    If this option is deactivated altogether, there will be no timeout at all and you either have to use the "OK" button at the bottom of the eSignatureOffice user interface to finish the signature process or - in case your device offers this option - by using the "OK" button Image Removed on its display.

    Stretch signature to the size of signature field.

    If this option is activated, your signature will not be added to the document with its original size, but it will be enlargened to fit as close as possible to the whole given signature rectangle. However, the width-to-height ratio stays the same and the biodata will not be altered! Only the final picture of your signature is optically changed to present it larger in your document.

     

     

     

    Display

    ...

    Display document context on LCD while signing (B/W)

    ...

    With this option, you can determine, if the loaded document should be shown on your signature device display when switching from viewing the document to signing the document or if a standardized background should be shown. Contrary to devices with coloured displays, black-and-white device are only able to show a limited part of the document, which is within the boundaries of the chosen sign rectangle. 

    Furthermore, if you wish to display custom text on the device, this option has to be deactivated.

    By default, this option is not used for black-and-white devices, because only on devices with colour displays, the presentation of the document can be offered in satisfying quality.

    ...

    Display document context on LCD while signing (Colour)

    ...

    With this option, you can determine, if the loaded document should be shown on your signature device display when switching from viewing the document to signing the document or if a standardized background should be shown. Contrary to devices with coloured displays, black-and-white device are only able to show a limited part of the document, which is within the boundaries of the chosen sign rectangle. 

    Furthermore, if you wish to display custom text on the device, this option has to be deactivated.

    Deactivate this option to speed up your signature process a little bit, because then the transfer of the document from the computer to the sign pad (to show it there) is not required anymore and so saves time.

    ...

    This option makes black-and-white devices show a line near the bottom of the display while signing. This line shall assist the user, for example to achieve a straight-lined signature and to further the impression of a normal signature on paper.

    ...

    With this drop down menu, you can specify a certain fixed aspect ratio when manually drawing a sign rectangle. For example, if you use a device with a flat but wide aspect ratio of 10:2,5 (Classic or Standard pads), set the appropriate option and the sign rectangle will always keep this aspect ratio. This makes the sign rectangle fit better with the size of the actual signing area of your pad and so offers a better feeling for the signature to the user.

    If you are using eSignatureOffice only in combination with signature sets, this feature is irrelevant. By default it's set to "Free" (like in free handed) and so allows to set width and height according to your wishes. In case you are not sure, which type of device you are using, you can use the small button with the magnifying glass icon Image Removed to search for the connected device.

    ...

    With the help of this option, you can upload premade signature dialogues to your sign pad, for example to show customized buttons or notes. Currently, there are only two dialogues for the naturaSign Mobile Pad available in your eSignatureOffice subfolder named "dialogs". These can, for example, be used to show a "OK/Repeat/Cancel" dialogue, which normally would not be available for this type of pad.

    ...

    Signature rectangle

     

     

    With this option, you can set the percental size of the signature rectangle on the display of the connected signing device with colour display. To achieve this, the background of the document to sign will be zoomed in or out to get to the desired size.

    However, due to the possibility to choose the ratio of your signature rectangle yourself instead of it being a set value, there are some limitations to this function:

    ...

    With a set percentage of 100% and matching ratio, the full display size will always be used. The picture on the right side of the menu will show you an approximate preview of the future signature rectangle, if the matching ratio is kept. By zooming in, this feature seemingly provides the user with more space on the signing pad, which can be really useful, for example with long names.

    ...

    100%:

    Image Removed

    • larger zoom
    • more space to sign

    ...

    60%:

    Image Removed

     

     

     

    Font (naturaSign series)

    In this menu, you can predefine templates to represent a small, medium and large font, which later can be used in signature-sets or to show text on the signature device. Learn more about this in the paragraph Text on pad.

    Image Removed

    The templates "Small", "Medium" and "Large" can be encountered in other menus, too, and you can customize them here with several options, which are typical for text formatting: 

    • Font/typeface
    • Font size
    • Bold
    • Italic

    For each of these three templates, you can directly see how it will look later, for example when used on your sign pad to show custom text.

     

     

     

     

    Signature image

    In this menu, you can adjust the colour as well as the visibility options for your signature field and for some devices the signature line itself.

    Image Removed
    Automatic selection of StepOver signature pads at application startIf this option is activated and no signature device has been selected beforehand, eSignatureOffice will automatically select one for you during the program start. If a signature pad is connected to a tablet pc, the pad will also be selected. If more than one pad is connected, devices with colour display will be favoured over those with black-and-white displays.
    Choose third-party devices, which should be supported by eSignatureOffice

    With the checkboxes here available, you can select those kinds of devices, which should be searched for and shown in the device search additionally to the usual StepOver signature pads.

    Please take note, that a special tablet-PC licence is needed if you want to use tablet-PC touches or pens to sign your documents. The demoversion allows using all these devices.

    Please also take note, that using iOS as well as Android smartphones and tablets is possible, but you will need an additional app on your smartphone to do this. Find out more about this here. (HIER VERKNÜPFUNG ZU SOWIFI ERKLÄRUNG EINFÜGEN)

    Button: "Select signature device"

    Using this button, will - after a short search - list all available, connected signature devices, which are also allowed by your limitations (see previous options). An example picture with a computer mouse, two tablet-PC devices and a StepOver sign pad is shown to the right.

    After choosing the desired signature device and confirming your choice by using the "OK" button, eSignatureOffice will automatically configure the connection to the chosen device and its settings.

    Now your device is ready to use.

     

    Please be aware, that you can connect multiple signature devices to your computer simultaneously as shown in this example, but you can always use only one device actively for your signatures! If you wish to change your choice, you have to repeat the process either as just described here via the administration menu oder by using "Options | Set signature device..." in your eSignatureOffice main menu.

    Image Added
    Save signature automatically after X seconds.

    If this option is chosen, eSignatureOffice uses an automatic timeout counter, which starts after registering the last input on the signature device. By default, two seconds are preset here, which, according to experience, offers enough time to switch between different words or add lines or points to your signature. It's recommended to set this timer not too low in order to prevent a premature end of your signature process as well as to offer the signer enough time to push the "Repeat" button when being not satisfied with the signature.

    If this option is deactivated altogether, there will be no timeout at all and you either have to use the "OK" button at the bottom of the eSignatureOffice user interface to finish the signature process or - in case your device offers this option - by using the "OK" button Image Added on its display.

    Stretch signature to the size of signature field.

    If this option is activated, your signature will not be added to the document with its original size, but it will be enlargened to fit as close as possible to the whole given signature rectangle. However, the width-to-height ratio stays the same and the biodata will not be altered! Only the final picture of your signature is optically changed to present it larger in your document.

     

     

    ...

     

    Display

    Image Added
    Click here to protect the settings below with a password.This button is available in all cathegories of the administration and allows to set a password to protect your settings from getting changed. You can do this for each menu separately or for all menus at once.

    Display document context on LCD while signing (B/W)

    With this option, you can determine, if the loaded document should be shown on your signature device display when switching from viewing the document to signing the document or if a standardized background should be shown. Contrary to devices with coloured displays, black-and-white device are only able to show a limited part of the document, which is within the boundaries of the chosen sign rectangle. 

    Furthermore, if you wish to display custom text on the device, this option has to be deactivated.

    By default, this option is not used for black-and-white devices, because only on devices with colour displays, the presentation of the document can be offered in satisfying quality.

    Display document context on LCD while signing (Colour)

    With this option, you can determine, if the loaded document should be shown on your signature device display when switching from viewing the document to signing the document or if a standardized background should be shown. Contrary to devices with coloured displays, black-and-white device are only able to show a limited part of the document, which is within the boundaries of the chosen sign rectangle. 

    Furthermore, if you wish to display custom text on the device, this option has to be deactivated.

    Deactivate this option to speed up your signature process a little bit, because then the transfer of the document from the computer to the sign pad (to show it there) is not required anymore and so saves time.

    Display signature line on LCD

    This option makes black-and-white devices show a line near the bottom of the display while signing. This line shall assist the user, for example to achieve a straight-lined signature and to further the impression of a normal signature on paper.

    Signature field aspect ratio:

    With this drop down menu, you can specify a certain fixed aspect ratio when manually drawing a sign rectangle. For example, if you use a device with a flat but wide aspect ratio of 10:2,5 (Classic or Standard pads), set the appropriate option and the sign rectangle will always keep this aspect ratio. This makes the sign rectangle fit better with the size of the actual signing area of your pad and so offers a better feeling for the signature to the user.

    If you are using eSignatureOffice only in combination with signature sets, this feature is irrelevant. By default it's set to "Free" (like in free handed) and so allows to set width and height according to your wishes. In case you are not sure, which type of device you are using, you can use the small button with the magnifying glass icon Image Added to search for the connected device.

    LCD Dialogues

    With the help of this option, you can upload premade signature dialogues to your sign pad, for example to show customized buttons or notes. Currently, there are only two dialogues for the naturaSign Mobile Pad available in your eSignatureOffice subfolder named "dialogs". These can, for example, be used to show a "OK/Repeat/Cancel" dialogue, which normally would not be available for this type of pad.

    Signature rectangle

     

     

    With this option, you can set the percental size of the signature rectangle on the display of the connected signing device with colour display. To achieve this, the background of the document to sign will be zoomed in or out to get to the desired size.

    However, due to the possibility to choose the ratio of your signature rectangle yourself instead of it being a set value, there are some limitations to this function:

    • the allowed minimum size is at 60%
    • Because signatures without document background do not show such a signature rectangle on the device display, this option does not affect such signatures
    • The target size is considered to be reached as soon as the set percentage height or width of the display is reached. This means, that a signature rectangle with a large height but small width will reach its vertical limit first and so will never be shown on full width.

    With a set percentage of 100% and matching ratio, the full display size will always be used. The picture on the right side of the menu will show you an approximate preview of the future signature rectangle, if the matching ratio is kept. By zooming in, this feature seemingly provides the user with more space on the signing pad, which can be really useful, for example with long names.

    Here some example pictures of duraSign Pad Brilliance displays while signing with different percentages:

    100%:

    Image Added

    • larger zoom
    • more space to sign

    60%:

    Image Added

     

     

    ...

     

    Font (naturaSign series)

    In this menu, you can predefine templates to represent a small, medium and large font, which later can be used in signature-sets or to show text on the signature device. Learn more about this in the paragraph Text on pad.

    Image Added

    The templates "Small", "Medium" and "Large" can be encountered in other menus, too, and you can customize them here with several options, which are typical for text formatting: 

    • Font/typeface
    • Font size
    • Bold
    • Italic

    For each of these three templates, you can directly see how it will look later, for example when used on your sign pad to show custom text.

     

     

    ...

     

     

    Signature image

    In this menu, you can adjust the colour as well as the visibility options for your signature field and for some devices the signature line itself.

    Image Added
    Click here to protect the settings below with a password.This button is available in all cathegories of the administration and allows to set a password to protect your settings from getting changed. You can do this for each menu separately or for all menus at once.
    Signature strokes

    With this option, you can set the colour of your signature line - this counts for eSignatureOffice as well as for your signature device. Please take care, however, that coloured signature lines can obviously only be seen with their correct colour on devices with coloured display (e.g. Colour, Brilliance). When using black-and-white devices, this option only influences the colour of your signature lines in the program but not on the device display.

    Image Added Attention: We are assuming that documents, which are designated to be signed, have a white background. So, you should not set the signature colour to white or other, very bright colours because this could lead to flawed image transmissions between sign pad and computer, because not enough distinct optical image data can be identified.

    Draw frame

    Setting this check mark activates a visible frame around your signature field while drawing the field as well as while signing. This frame will be visible in eSignatureOffice and on your signature device. Bewow the check mark, the frame thickness can be set in pixels, while its colour can be set via the "Change colour..." button. Please be aware, that these settings can only be visualized on devices with coloured displays (e.g. Colour, Brilliance pads), because black-and-white devices generally never show a distinct signature field, but the whole display area is used as signature field.

    This frame will not be included, when the signature is added to the document. It's only visible during the signing process.

    Colour fill

    Setting this check mark activates a visible coloured filling to your signature field. You can use this option to complement the colours of the signature, the frame and the background filling, in eSignatureOffice as well as on your signature device.

    You can change the opacity (in %) as well as the colour with the "Change colour..." button. Please be aware, that these settings can only be visualized on devices with coloured displays (e.g. Colour, Brilliance pads), because black-and-white devices generally never show a distinct signature field, but the whole display area is used as signature field. Moreover, colours are obviously not shown on black-and-white displays.

    This coloured filling will not be included, when the signature is added to the document. It's only visible during the signing process.

    Preview

    This shows a preview of the current settings for your future signature field.

     

     

    ...

     

    Colour devices

    In this menu, you can set different options, which affect the usage of devices with coloured displays (e.g. Colour, Brilliance pads). The options for these pads are shown separately, because only devices with coloured displays allow a document preview and don't offer customizable side bar buttons, for example. Black-and-white devices (e.g. Classic, Mobile) will not be affected by these settings.

    Image Added
    Click here to protect the settings below with a password.This button is available in all cathegories of the administration and allows to set a password to protect your settings from getting changed. You can do this for each menu separately or for all menus at once.
    Signature strokesWith Enable document viewImage Removed

    Activating this option , you can set the colour of your signature line - this counts for eSignatureOffice as well as for your signature device. Please take care, however, that coloured signature lines can obviously only be seen with their correct colour on devices with coloured display (e.g. Colour, Brilliance). When using black-and-white devices, this option only influences the colour of your signature lines in the program but not on the device display.

    Image Removed Attention: We are assuming that documents, which are designated to be signed, have a white background. So, you should not set the signature colour to white or other, very bright colours because this could lead to flawed image transmissions between sign pad and computer, because not enough distinct optical image data can be identified.

    Draw frame

    Setting this check mark activates a visible frame around your signature field while drawing the field as well as while signing. This frame will be visible in eSignatureOffice and on your signature device. Bewow the check mark, the frame thickness can be set in pixels, while its colour can be set via the "Change colour..." button. Please be aware, that these settings can only be visualized on devices with coloured displays (e.g. Colour, Brilliance pads), because black-and-white devices generally never show a distinct signature field, but the whole display area is used as signature field.

    This frame will not be included, when the signature is added to the document. It's only visible during the signing process.

    Colour fill

    Setting this check mark activates a visible coloured filling to your signature field. You can use this option to complement the colours of the signature, the frame and the background filling, in eSignatureOffice as well as on your signature device.

    You can change the opacity (in %) as well as the colour with the "Change colour..." button. Please be aware, that these settings can only be visualized on devices with coloured displays (e.g. Colour, Brilliance pads), because black-and-white devices generally never show a distinct signature field, but the whole display area is used as signature field. Moreover, colours are obviously not shown on black-and-white displays.

    This coloured filling will not be included, when the signature is added to the document. It's only visible during the signing process.

    Preview

    This shows a preview of the current settings for your future signature field.

     

     

     

    Colour devices

    In this menu, you can set different options, which affect the usage of devices with coloured displays (e.g. Colour, Brilliance pads). The options for these pads are shown separately, because only devices with coloured displays allow a document preview and don't offer customizable side bar buttons, for example. Black-and-white devices (e.g. Classic, Mobile) will not be affected by these settings.

    Image Removed
    Click here to protect the settings below with a password.This button is available in all cathegories of the administration and allows to set a password to protect your settings from getting changed. You can do this for each menu separately or for all menus at once.
    Disable document view

    Activating this option makes document not be displayed on your colour devices after being loaded in eSignatureOffice, even if the device would be able to do this. If you change this setting while in operation, the document has to be reloaded to allow the change to take place on your signature device.

    Keep zoom level between pages

    Activating this option saves the zoom level when turning the pages while viewing the document on your signature device. If this option is deactivated, each turn of a page on the device will result in the page being fit to width.

    Detect colour devices automatically to display document

    Activating this option, prioritizes devices with colour display and detects them automatically, if several different devices are connected to the computer when eSignatureOffice is started. This is necessary to allow documents being displayed directly on a sign pad, when the pad is used on a computer for the very first time and should not have to be configured before using it.

    Button Config

    These buttons mean the buttons on a signature device, which are displayed in a separate side bar and at the time of this manual's creation are only supported by devices of the duraSign product range and the naturaSign Colour.

    In the drop down menu, choose the mode, whose buttons you want to edit:

    Here you can...

    • ...show or hide the different buttons by setting or removing the different check marks for each button.
    • ...click on the different buttons in the menu to change this button's colour on the device (each button can be customized separately).
    • ...click the button "Set to Default" to reset the whole current chosen mode back to its default settings.

    A detailled description of the three different modi and their respective buttons will follow right now.

     

     

    Document Viewing Mode

    This is the default mode for devices with colour devices after loading a document and it shows this document before and after adding a signature to allow inspecting or verifying it.

    allows the document to be shown on your colour devices after being loaded in eSignatureOffice. If this option is enabled, the two following options will be usable, too.

    Keep LCD in sync with monitorIf this option is active, eSignatureOffice will always show the same part of the document on your pad display as you are currently seeing on your computer monitor. There is a slight delay of 1 second before eSignatureOffice reacts to this. This is done to prevent continuous loading of the document while you are scrolling. So, as soon as you stop on a document page for 1 second to read it, this document page will be sent to your pad to be shown there, too, so that your customer might read the same part.
    Use continuous scrolling mode in landscapeThis option is currently only effective on the duraSign Pad 10.0 and it allows scrolling through the pages of a document on the device without the need to load each page separately. You can just use the pen and push the document page up and down until the next one is shown and so on. Please take note that this is only usable while the duraSign Pad 10.0 is in landscape mode.
    Keep zoom level between pages

    Activating this option saves the zoom level when turning the pages while viewing the document on your signature device. If this option is deactivated, each turn of a page on the device will result in the page being fit to width.

    Initial view of the document:This option determines, which zoom level shall be used initially on the signature device with colour display (not in eSignatureOffice). Of course this can be changed on the run with the zoom buttons on the device.
    Button Config

    These buttons mean the buttons on a signature device, which are displayed in a separate side bar and at the time of this manual's creation are only supported by devices of the duraSign product range and the naturaSign Colour.

    In the drop down menu, choose the mode, whose buttons you want to edit:

    Here you can...

    • ...show or hide the different buttons by setting or removing the different check marks for each button.
    • ...click on the different buttons in the menu to change this button's colour on the device (each button can be customized separately).
    • ...click the button "Set to Default" to reset the whole current chosen mode back to its default settings.

    A detailled description of the three different modi and their respective buttons will follow right now.

     

     

    Document Viewing Mode

    This is the default mode for devices with colour devices after loading a document and it shows this document before and after adding a signature to allow inspecting or verifying it.

    Image AddedRotate: Rotates the view on the sign pad to left handed mode.
    Zoom In: Enlargens the document on the device display.
    Zoom Out: Scales the document on the device display down.
    Previous Page: Loads the previous page of your document.
    Next Page: Loads the next page of your document.

    Start Signature: This button is only visible when starting eSignatureOffice in combination with a signature set and when the button in this signature set is not set to invisible! Using this button will make the signature set start at the first signature field, which has not been signed, yet. Learn more about signature sets in Automatic creation of signing fields: Working with signature-sets.

     

     

    Sign Mode (without showing the document)

    This mode (or a similar looking one) will be shown, when you deactivate the option "Display document context on LCD while signing (Colour)" in the administration menu "Signature Device | Display". This can be useful when you either want to show custom text on the pad using a signature set or when you generally want to speed up the whole signature process.

    Start Signature: This button is only visible when starting eSignatureOffice in combination with the button in this signature set is not set to invisible! Using this button will make the signature set start at the first signature field signed Learn more about signature sets in Automatic creation of signing fields: Working with signature-sets.
    Image AddedRotate: Rotates the view on the sign pad to left handed mode.
    Zoom In: Enlargens the document on the device display.
    Zoom Out: Scales the document on the device display down.
    Previous Page: Loads the previous page of your document.
    Next Page: Loads the next page of your document.

    Next Signature: Jumps to the next signature field within a signature set. This button is only visible when using a signature set and when

    there are still signatures left to do.

    Previous Signature: Jumps back to the last signature of a signature set, which has not been

    added, yet.

     

     

    Sign Mode (without showing the document)

    ...

    Okay: This button confirms the current signature, if you either don't want to wait for the automatic timeout or if this timeout is deactivated. You can change this behaviour in the administration menu "Signature Device

    ...

    Next Signature: Jumps to the next signature field within a signature set. This button is
    Image RemovedRotate: Rotates the view on the sign pad to left handed mode.

    " by either changing the time value or removing the check mark at "Save signature automatically after X seconds"

    Repeat: Removes the whole current signature from the display and restarts the signature field.

    Cancel: Stops the current signing process. If the current signature field is a mandatory field within a signature set, you will be prompted in eSignatureOffice, that cancelling a mandatory field leads to cancelling the whole signature process.

     

     

    Sign Mode (showing the document)

    This mode is the default view for devices with colour display. So you can show a section of the document surrounding the current signature field and thus can always be sure, that you add the signature, where you want to add it.

    Image AddedRotate: Rotates the view on the sign pad to left handed mode.
    Next signature: Jumps to the next signature field within a signature set. This button is only visible when using a signature set and when there are still signatures left to do.
    Previous Signaturesignature: Jumps back to the last signature of a signature set, which has not been added, yet.
    Okay: This button confirms the current signature, if you either don't want to wait for the automatic timeout or if this timeout is deactivated. You can change this behaviour in the administration menu "Signature Device" by either changing the time value or removing the check mark at "Save signature automatically after X seconds"
    Repeat: Removes the whole current signature from the display and restarts the signature field.
    Cancel: Stops the current signing process. If the current signature field is a mandatory field within a signature set, you will be prompted in eSignatureOffice, that cancelling a mandatory field leads to cancelling the whole signature process.

     

     

    Sign Mode (showing the document)

    This mode is the default view for devices with colour display. So you can show a section of the document surrounding the current signature field and thus can always be sure, that you add the signature, where you want to add it.

    Image RemovedRotate: Rotates the view on the sign pad to left handed mode.
    Next signature: Jumps to the next signature field within a signature set. This button is only visible when using a signature set and when there are still signatures left to do.
    Previous signature: Jumps back to the last signature of a signature set, which has not been added, yet.
    Okay: This button confirms the current signature, if you either don't want to wait for the automatic timeout or if this timeout is deactivated. You can change this behaviour in the administration menu "Signature Device" by either changing the time value or removing the check mark at "Save signature automatically after X seconds"
    Repeat: Removes the whole current signature from the display and restarts the signature field.
    Cancel: Stops the current signing process. If the current signature field is a mandatory field within a signature set, you will be prompted in eSignatureOffice, that cancelling a mandatory field leads to cancelling the whole signature process.

     

    ...

    Mobile devices (WIFI)

    In this menu you define how mobile devices (smartphones and tablets based on Android or iOS) are allowed to be found by the device search. For this, several network options are available. You can find more detailed instructions on how to use mobile devices here  HIER LINK ZUR SOWIFI ANLEITUNG EINFÜGEN

    Image Added

    Search smartphones and tablets only in the current network but also allow creating a WIFI hotspot

     

    With this choice you will get an additional option in the device search menu to allow creation of a lokal hotspot (always given your computer hardware is capable of doing so). This way, each time you want to select your signature device, you can decide if you want to create a new hotspot network or if the already available WIFI network is already sufficient. If an additional hotspot network is created, then always with the login details shown here and where you can also change them.

    These login details will also be shown in the device search menu after the hotspot has been created.

    Search smartphones and tablets only in the current network (no hotspot option)

    With this choice, the optional creation of an additional hotspot will not be available and mobile devices will only be found, if they are already in the same WIFI network as the computer, on which eSignatureOffice is running.

    Always automatically create a WIFI hotspot and search only there for smartphones and tablets

    With this choice, an additional lokal hotspot will always be created automatically (of course given that your computer hardware is capable of doing so). For this hotspot, the login details given here will be used.

    These login details will also be shown in the device search menu after the hotspot has been created.

    Hotspot login details:

    With these login credentials, you can define the name as well as the password of your potential lokal hotspot. Please be aware that according to the current WPA2 standard this password has to be at least 8 characters long.

    When eSignatureOffice is first installed (and also with each reset to factory settings) a random network name as well as a random password will be created for you.

     

     

    ...

    Device specific

    In this menu, you can find multiple settings which only apply as long as the signpad variant ist used, for which the particular setting has been done. This allows using different products at the same time while using settings, which are only relevant to this specific pad type. This includes features like a reduced area, in which the user can sign on the signpad (e.g. when using a custom background image), a precisely chosen target position and target size of the signature rectangle on pad with a large device display or if a device is supposed to be started or finished either in left- or right handed mode. As soon as this menu tab is selected, the currently connected signature pad is automatically detected and preset in the drop down list "Device Type". 

    ...

    Click here to protect the settings below with a password.This button is available in all cathegories of the administration and allows to set a password to protect your settings from getting changed. You can do this for each menu separately or for all menus at once.
    Action the user can perform with documents

    With these options, you either allow or forbid the end user to use the stated options for opening, closing or saving files. This way, the corresponding buttons in the eSignatureOffice user interface will be deactivated. However, this does not stop macros from executing these actions! We are assuming, that macros are not created by end users and so those options to handle files should remain available.

    Save signed documents with read-only attribute

    If you activate this option, eSignatureOffice will check all documents upon saving them for contained signatures. If there are any, saved documents will automatically receive the file attribute "read-only". This option shall prevent losing signatures by accidentially overwriting existing files. However, for this, it's important to pay attention to the next option, too!

    Do not remove destination file

    Activate this option when using the web application SharePoint by Microsoft and you want version control of your files.This way, the original file of your document will not be deleted prior to saving and re-writing it afterwards, but it will be copied first and then the previous file will be overwritten. This is the only way SharePoint can recognize your file as a changed one instead of a new one.

    Copy to temporary file and then rename to destination file 
    If destination If destination file is read-only

    With this option, you determine how an existing file with read-only attribute is to be handled when using "Save" (but not "Save as..."!). This is applied to manual saving procedures as well as macros.

    • Ask: When trying to overwrite a read-only file, eSignatureOffice will ask you what to do and can choose time and time again until making a permanent decision.
    • Always Overwrite: The target file will be overwritten without notification.
    • Never Save: The saving procedure will be ignored without notification. Use this option to prevent accidentially overwriting your documents.

    Addendum: When trying to overwrite a read-only file manually via "Save as...", this will normally be prevented by your operating system. In these cases, please use another file name. The options here are not able to affect the "Save as..." function.

    Allow editing of read-only fields

    When using a PDF document with included form fields (e.g. text fields or check boxes), they can already be set to read-only by the creator of these fields, regardless of the file's general read-only attribute. With this option, you can determine if such fields should be allowed to be edited anyway or not.

    Lock form fields after first signature

    Because PDF form fields often contain information, which is important for the signature itself, you have the option to prevent editing these form fields after at least one signature has been added to the document (this applied to picture signatures/digital stamps as well as normal signatures with a signature device). In consequence this also means, that all form fields have to be filled prior to the first signature. This feature is security-relevant and you should only deactivate it, when you are aware of the risk this brings with it.

    Libraries

    Basically, PDF libraries advice the application on how to use PDF files - how to read them, illustrate them, print them etc. With the two provided drop-down menus, you can change the relevant library in order to make eSignatureOffice use another way to search text within the document or print the document. For example, when a search term consisting of multiple words cannot be found for an intelligent signature set, this can be due to the internal structure of your PDF document. This internal structure can be totally different from what you see in the end, depending on how the file was created. In these cases, it can be worthwhile to test the other provided libraries.

    Search

    Using the options to search document text in the "Tools" main menu or by using the standard search hot keys (CTRL + F/N/P), eSignatureOffice will jump to the search results and mark them for better visibility - just like in other text editing programs.

    In this part of the menu, you can change the used search library as well as the appearance of the search result marking. By default, no frame is added and the background of the text is set to 60% yellow. If you change these settings, you can instantly see the preview for your changes on the right side.

    ...

    Click here to protect the settings below with a password.This button is available in all cathegories of the administration and allows to set a password to protect your settings from getting changed. You can do this for each menu separately or for all menus at once.
    Documents

    This is the list, which previews all your entries, which you can do in this menu with their respective colours, text formats and icons for the different options (PDF only, signature set only, PDF + signature set) to make them easily recognizable. All your entries will later be visible in the sidebar under the first tab named "Documents". This tab will hold all your entries, no matter if they are only single files, whole folders or the list of the most recently used files in each category.

    By default, there are already two entries:

    • a group title with grey background, which is named "Most recently used"
    • a group with the type "Recently Used PDF" without an own name (Only a dash as name means this entry will have no leading name header. This means in consequence that a single-file entry will not be visible because they are always shown with their name! If a list entry's name is only a dash, this list is always shown expanded.) This group will always show the last used PDFs (by default up to a maximum of 32 files, but this value can be changed in the lower right of this menu).
    Insert Clicking this button adds a new entry to your list and then you can change the settings of this new entry by using the other options described here.
    Remove Select one of your entries from the list and click the Remove button to delete this entry from the list.
    Up and down arrows With these arrows you can determine the order in which the different entries will be shown in the sidebar.
    Name:

    Please enter a name for your new entry here. Please be aware, that this name field will behave different for either single-entries or list-entries, which consist of multiple files (either because you are showing a whole folder or the most recently used files). The different behaviours will be explained with the help of examples after all the options have been described in this table.

    If you don't add a name, you will be prompted for one when you try to save your settings upon leaving the administration menu.

    You can also use only a dash as name, which will not show any name plate at all, but only the list, which has been selected for this entry. Please be aware, that due to how the sidebar entries work, nothing will be shown, if you are using the dash as name for a single-entry (e.g. a single file).

    Type of Group:

    This is the most influential choice in this menu, because this decides the type of entry, you are adding to your sidebar list.

    The following options are available:

    • Group title: This is just a group title, which looks the same as any other group names except for the triangle used to expand or reduce the list. This group type is best used in conjunction with the feature, that a group with only a dash as file name does not show its own name plate. The two default entries are using this interaction (see the explanation of the different entries below this table).
    • Text Only: These is a pure text entry, differing from the "Group title" option only in its indendation to show that it's not a group title but custom text.
    • File Name: Select this option to show only one single file, to which you have to enter the path and its name in the then appearing text field. The sidebar will then show the given name and clicking on it, will open only this file. This option is available for PDF documents or signature sets (SSS) or a combination of both file types, which will open both of them and try to start the signature set.
    • Directory: This is also available for PDFs, SSS files or both of these file types. However, in this case, you have to select a whole folder, which will then be shown in the sidebar and offer all its files with the appropriate file extension(s) to open. If there is already a PDF loaded, opening a SSS file from the sidebar will try to process it immediately. For this group type, you can decide if the natural state of this file list in the sidebar shall be expanded or not. Later, you can temporary change this state, but as soon as the "Documents" tab is closed, each list will return to its natural state as per your settings.
    • Recently Used: With this option, only the most recently used file with the appropriate file extension will be shown. Using the "Recently Used PDFSSS" group type will always show the last used PDFs with their corresponding signature sets. It will not show a list with the recently used PDFs and SSS files separately.

     

    With the options in the lower part of the menu, you can further customize these entries. (Explained below)

    OutlineIn this part of the menu, you can customize the appearance of any entry, you have chosen from the list on the left side. Here you can change the typical properties: font colour, background colour, formatting the text in bold, italic or underlining it.
    Most recently used filesIn this part of the menu, you can customize the behaviour of the different "Most recently used" file lists by choosing one of the options from the dropdown menu. 3 of the 4 possible entries are the group types previously described. However, the entry "Most recently used items in the main menu" is not seen in the sidebar but as - the name suggests - in the main menu of eSignatureOffice under "File | Open Last Used". Please be aware, that the next few options all apply only to the one list type, which you are selecting here in this dropdown menu.
    Allow displaying this list

    Activate this checkbox to make the type of list visible, which you selected from the dropdown list (either one of the 3 sidebar group types or the list in the main menu). Please take note, that this will not automatically show these lists in the sidebar, but only allow showing them. You still need to create an entry with the appropriate group type as described above!

    Show full pathWith this option you can decide, if only the file names are supposed to be shown for the selected list (including the file extension) or if the whole file path shall be shown.
    Save list on program exitWithout this option, each file list is only saved temporary for the current eSignatureOffice session. Leave this option activated to permanently save the currently in the dropdown menu selected list.
    Maximum number of entriesIn the lower right, you can find a text field named "Maximum number of entries" in which you can write down how many entries shall be saved at max, before the oldest entry is removed.
    DeleteClicking this button deletes the content of the currently selected list. The list entry itself is untouched and can be filled again with the next opened file.

     

    Here is an example of how it could look like with an explanation of the different settings afterwards:

    In the end, these settings......can lead to this sidebarExplanation
    Image Removed

    Image Removed

    The first two entries have stayed the same: a group title named "Most recently used" with grey background and below that the second entry has the group type "Recently Used PDF" with light blue background and just the dash as name (so no separate name will be shown in the sidebar). So it shows the 3 latest PDF files, which have been loaded. As soon as the list would exceed 32 files (with default settings), these files would be removed from the list, starting with the oldest, counting from the bottom to the top. The default red PDF icon is easily recognizable for this type of files.

     

    Image RemovedThe 3rd entry is a "Directory SSS" group. For this group type it's mandatory to select a folder, in which the desired files are located. Otherwise, no file can be shown. For these group types, you can decide to show the list expanded or not. The background is green and the name has been set manually to "SignatureSets". Signature set files are easily recognizable with their blue SSS icons.
    Image RemovedThis is a single entry and not the file name of the chosen PDF behind the entry is shown, but only the custom name, you have given the entry. The icon is still pointing toward the standard PDF file. Clicking this entry in the sidebar, will now open the document. With such entries, you do not have to care about the file name of your document (for example, because it might be very complicated for further file processing).
    Image RemovedThe last entry is currently selected to show its settings for this example. It is named "MRU PDF+SSS" and its group type is "Recently Used PDFSSS", which will create a list of file pairings: always one PDF and the signature set, which has been started with this PDF document. The list will initially be shown in its expanded state and it shows the full path for its entries. The combined pairings of PDF + SSS are easily recognizable with their green icon.

     

     

     

    PDF Converter

    In this menu tab, you can configure the StepOver PDF Converter. You can predefine startparameters or change the saving behaviour for documents after their conversion. You can learn more about the PDF converter in the chapter The StepOver PDF Converter: Setup and utilisation

    Image Removed
    Click here to protect the settings below with a password.This button is available in all cathegories of the administration and allows to set a password to protect your settings from getting changed. You can do this for each menu separately or for all menus at once.
    Transfer file to eSignatureOffice

    This is the PDF Converter's default behaviour, when using it via another application (for example Word). This way, your document will be converted to a PDF-file with the help of the printer driver and afterwards it will be automatically transmitted to eSignatureOffice and opened. Please take care, that this will not work, when eSignatureOffice is already started, because there can always be only one active instance of the program.

    Additional parameters:

    In addition to the already preset "-savedoc", you can provide further parameters here, which shall be passed from the PDF Converter to eSignatureOffice. Learn more about this in the chapter: Startparameter.

    Save file to a fixed destination:

    With the help of this option, you can make the PDF Converter save a converted file to a fixed file destination of your choice and rename it, instead of starting eSignatureOffice with it.

    However, there are three important things to remember:

    • Some destinations are protected by the User Account Control incorporated in modern operating systems. This includes system-relevant folders like "C:\", "C:\Windows" and "C:\Programs (x86)". In these folders, saving is only allowed with special access rights, which the PDF Converter is not granted. When choosing one of these folders as fixed destination, you will be notified after the conversion, that it's not allowed to save to this destination and where you will find your file.
      Usually, this will be "C:\Users\[your username]\AppData\Local\VirtualStore".
    • If you want to save your converted PDF file automatically to a fixed destination, you also have to provide a corresponding file name, because the conversion is done via temporary files. By default "Unnamed.pdf" is given here and if your appointed name might already be in use, you can use the option "Extend the file name with numbers if a file with the same name already exists." to add a continuous numbering to the end of these file names.
    • Because saving is not done by eSignatureOffice when using this option, we cannot offer the option to use the dynamic processing of document content to individualize the file destination of the final file name. If you want to use this feature, please use the previous option "Transfer file to eSignatureOffice" and afterwards save it dynamically by using a macro.
    Open "Save As..." dialog

    With this option, after each succesful conversion a normal "Save As..." dialog will be shown by your operating system, in which you can manually choose the destination and file name of your choice.

    Do not set PDF Converter settings

    This checkbox is only a supportive option, which is supposed to prevent unintended changes to the PDF Converter settings, if they were originally set not by eSignatureOffice but externally with the help of the sopconf.exe file in the Converter installation path. Without this checkbox, the default settings provided here would overwrite the external settings each time the administration menu settings are saved.

    As soon as you make any changes in this menu tab, this checkbox is automatically deactivated and your voluntary changes will apply.

     

     

     

    Security & Key management

    Image Removed
    Click here to protect the settings below with a password.This button is available in all cathegories of the administration and allows to set a password to protect your settings from getting changed. You can do this for each menu separately or for all menus at once.
    Ask for password at startup

    With this option you can prevent the unauthorized execution of the whole eSignatureOffice program instead of only protecting just parts of it like the administration menu. After assigning a password, you will be asked for it at the next program start.

    Image Removed Attention: In case of forgetting your password, it's not possible to undo this option by using the alternative way of accessing the adminstration menu via "StartManager.exe".

    Authentifizierung über LDAP

    The Lightweight Directory Access Protocol can be used to allow password protected access to eSignatureOffice, independant from StepOver. For this function, you need your own server with corresponding LDAP directory structure. Enter the IP address and portnumber (if not using the default port) in the corresponding textfields. The field "DN" (= Disinguished Name) defines the LDAP directory path on the server. With the "Check" button, you can test, if the given data can really be used or if there is any problem with it.

    When starting eSignatureOffice the next time, the user has to enter his login name and password.

    You can find an example of detailled documentation for the LDAP network protocol here: https://en.wikipedia.org/wiki/Lightweight_Directory_Access_Protocol

    Actions to be taken if the file program.ini is deleted or changed from outside eSignatureOffice

    This Program.ini is normally located at "C:\Users\[Benutzername]\AppData\Local\StepOver\eSignatureOffice 5.0" or a similar location, depending on your version of eSignatureOffice. In this file many important settings are saved and with the given option, you can choose what should happen, if the file has been manipulated:

    • Do nothing: This is the default setting and results in the user not getting any feedback about the detected manipulation of the Program.ini. eSignatureOffice is simply reset to default settings (including the licence!), which is basically the demo version.
    • Inform user: By choosing this setting, the user is informed upon application start, when a manipulated file has been detected. As with the previous option, all options are reset to default settings, too (again, including the licence), but in contrast to the next option, eSignatureOffice is still usable. 
    • Do not start eSignatureOffice: If you choose this setting, you are blocking the user completely from using the whole application in case of a manipulated Program.ini. This means, that eSignatureOffice will have to be re-installed on the system.
    Require a password to use old generation of devices

    With this option, you can activate the password request feature for older devices (prior to the naturaSign devices) before the user is able to use these pads.

    Disable signature confirmation dialogue (disables digital signature creation inside the pad)

    Activating this option, makes the so-called "hash-dialog" disappear, which normally is shown after each signature on your signing device as well as in eSignatureOffice. This dialog is used to confirm the performed signature.

    If this dialog is activated, the digital signature is created within the pad's own software with the pad's own security certificates. Without hash-dialog, the digital signature is created by eSignatureOffice and the whole signing process is sped up, because there is one less user interaction.

    This setting has no influence on the encryption of the signature biodata and so is not critical in terms of data security. However, please be aware, that there will be no pad security certificate available to be shown when the signature is checked later, for example in Adobe.

    Check file integrity after signing

    This option makes eSignatureOffice avouch the integrity of all signatures in the whole signed document by checking all digital certificates of each and every included signature.

    Check embedded signature image

    With the help of this option, eSignatureOffice checks after a signature, if it contains enough image data to be displayed at all. For example does this prevent a signature from being added, if the signing colour has been set to "white" and so with a white document background, in the end nothing would be seen anymore.

     

     

     

    Timestamp

    In this menu, you can make eSignatureOffice include your signatures with a time stamp to prove the exact time of the signature. For this, StepOver provides an independant time stamp server.

    Image Removed
    Start expandedThis option is only available for directory types of groups and when activated, the chosen group is initially always shown expanded and so shows all its content. Clicking on the small arrow icon in the group name allows closing the list again.
    Do not show iconsThis option can be used to disable the icons next to each entry in the chosen group. This helps to reduce space usage in the side bar (for example when you want to show longer file names and/or only have a low resolution display)

    Bring application to top when files are changed

    This option is only available for directories and makes eSignatureOffice to show in the foreground as soon as a new document is detected in the configured folder. With this option, you can keep eSignatureOffice in the background or minimized and when a new file is detected, the program is brought to the top, where you can select, open and sign the new document.

    OutlineIn this part of the menu, you can customize the appearance of any entry, you have chosen from the list on the left side. Here you can change the typical properties: font colour, background colour, formatting the text in bold, italic or underlining it.
    Most recently used filesIn this part of the menu, you can customize the behaviour of the different "Most recently used" file lists by choosing one of the options from the dropdown menu. 3 of the 4 possible entries are the group types previously described. However, the entry "Most recently used items in the main menu" is not seen in the sidebar but as - the name suggests - in the main menu of eSignatureOffice under "File | Open Last Used". Please be aware, that the next few options all apply only to the one list type, which you are selecting here in this dropdown menu.
    Allow displaying this list

    Activate this checkbox to make the type of list visible, which you selected from the dropdown list (either one of the 3 sidebar group types or the list in the main menu). Please take note, that this will not automatically show these lists in the sidebar, but only allow showing them. You still need to create an entry with the appropriate group type as described above!

    Show full pathWith this option you can decide, if only the file names are supposed to be shown for the selected list (including the file extension) or if the whole file path shall be shown.
    Save list on program exitWithout this option, each file list is only saved temporary for the current eSignatureOffice session. Leave this option activated to permanently save the currently in the dropdown menu selected list.
    Maximum number of entriesIn the lower right, you can find a text field named "Maximum number of entries" in which you can write down how many entries shall be saved at max, before the oldest entry is removed.
    DeleteClicking this button deletes the content of the currently selected list. The list entry itself is untouched and can be filled again with the next opened file.

     

    Here is an example of how it could look like with an explanation of the different settings afterwards:

    In the end, these settings......can lead to this sidebarExplanation
    Image Added

    Image Added

    The first two entries have stayed the same: a group title named "Most recently used" with grey background and below that the second entry has the group type "Recently Used PDF" with light blue background and just the dash as name (so no separate name will be shown in the sidebar). So it shows the 3 latest PDF files, which have been loaded. As soon as the list would exceed 32 files (with default settings), these files would be removed from the list, starting with the oldest, counting from the bottom to the top. The default red PDF icon is easily recognizable for this type of files.

     

    Image AddedThe 3rd entry is a "Directory SSS" group. For this group type it's mandatory to select a folder, in which the desired files are located. Otherwise, no file can be shown. For these group types, you can decide to show the list expanded or not. The background is green and the name has been set manually to "SignatureSets". Signature set files are easily recognizable with their blue SSS icons.
    Image AddedThis is a single entry and not the file name of the chosen PDF behind the entry is shown, but only the custom name, you have given the entry. The icon is still pointing toward the standard PDF file. Clicking this entry in the sidebar, will now open the document. With such entries, you do not have to care about the file name of your document (for example, because it might be very complicated for further file processing).
    Image AddedThe last entry is currently selected to show its settings for this example. It is named "MRU PDF+SSS" and its group type is "Recently Used PDFSSS", which will create a list of file pairings: always one PDF and the signature set, which has been started with this PDF document. The list will initially be shown in its expanded state and it shows the full path for its entries. The combined pairings of PDF + SSS are easily recognizable with their green icon.

     

     

    ...

     

    PDF Converter

    In this menu tab, you can configure the StepOver PDF Converter. You can predefine startparameters or change the saving behaviour for documents after their conversion. You can learn more about the PDF converter in the chapter The StepOver PDF Converter: Setup and utilisation

    Image Added
    Click here to protect the settings below with a password.This button is available in all cathegories of the administration and allows to set a password to protect your settings from getting changed. You can do this for each menu separately or for all menus at once.
    Transfer file to eSignatureOffice

    This is the PDF Converter's default behaviour, when using it via another application (for example Word). This way, your document will be converted to a PDF-file with the help of the printer driver and afterwards it will be automatically transmitted to eSignatureOffice and opened. Please take care, that this will not work, when eSignatureOffice is already started, because there can always be only one active instance of the program.

    Additional parameters:

    In addition to the already preset "-savedoc", you can provide further parameters here, which shall be passed from the PDF Converter to eSignatureOffice. Learn more about this in the chapter: Startparameter.

    Save file to a fixed destination:

    With the help of this option, you can make the PDF Converter save a converted file to a fixed file destination of your choice and rename it, instead of starting eSignatureOffice with it.

    However, there are three important things to remember:

    • Some destinations are protected by the User Account Control incorporated in modern operating systems. This includes system-relevant folders like "C:\", "C:\Windows" and "C:\Programs (x86)". In these folders, saving is only allowed with special access rights, which the PDF Converter is not granted. When choosing one of these folders as fixed destination, you will be notified after the conversion, that it's not allowed to save to this destination and where you will find your file.
      Usually, this will be "C:\Users\[your username]\AppData\Local\VirtualStore".
    • If you want to save your converted PDF file automatically to a fixed destination, you also have to provide a corresponding file name, because the conversion is done via temporary files. By default "Unnamed.pdf" is given here and if your appointed name might already be in use, you can use the option "Extend the file name with numbers if a file with the same name already exists." to add a continuous numbering to the end of these file names.
    • Because saving is not done by eSignatureOffice when using this option, we cannot offer the option to use the dynamic processing of document content to individualize the file destination of the final file name. If you want to use this feature, please use the previous option "Transfer file to eSignatureOffice" and afterwards save it dynamically by using a macro.
    Open "Save As..." dialog

    With this option, after each succesful conversion a normal "Save As..." dialog will be shown by your operating system, in which you can manually choose the destination and file name of your choice.

    Do not set PDF Converter settings

    This checkbox is only a supportive option, which is supposed to prevent unintended changes to the PDF Converter settings, if they were originally set not by eSignatureOffice but externally with the help of the sopconf.exe file in the Converter installation path. Without this checkbox, the default settings provided here would overwrite the external settings each time the administration menu settings are saved.

    As soon as you make any changes in this menu tab, this checkbox is automatically deactivated and your voluntary changes will apply.

     

     

    ...

     

    Security & Key management

    Image Added
    Click here to protect the settings below with a password.This button is available in all cathegories of the administration and allows to set a password to protect your settings from getting changed. You can do this for each menu separately or for all menus at once.
    Ask for password at startup

    With this option you can prevent the unauthorized execution of the whole eSignatureOffice program instead of only protecting just parts of it like the administration menu. After assigning a password, you will be asked for it at the next program start.

    Image Added Attention: In case of forgetting your password, it's not possible to undo this option by using the alternative way of accessing the adminstration menu via "StartManager.exe".

    Authentification with LDAP

    The Lightweight Directory Access Protocol can be used to allow password protected access to eSignatureOffice, independant from StepOver. For this function, you need your own server with corresponding LDAP directory structure. Enter the IP address and portnumber (if not using the default port) in the corresponding textfields. The field "DN" (= Disinguished Name) defines the LDAP directory path on the server. With the "Check" button, you can test, if the given data can really be used or if there is any problem with it.

    When starting eSignatureOffice the next time, the user has to enter his login name and password.

    You can find an example of detailled documentation for the LDAP network protocol here: https://en.wikipedia.org/wiki/Lightweight_Directory_Access_Protocol

    Actions to be taken if the file program.ini is deleted or changed from outside eSignatureOffice

    This Program.ini is normally located at "C:\Users\[Benutzername]\AppData\Local\StepOver\eSignatureOffice 5.0" or a similar location, depending on your version of eSignatureOffice. In this file many important settings are saved and with the given option, you can choose what should happen, if the file has been manipulated:

    • Do nothing: This is the default setting and results in the user not getting any feedback about the detected manipulation of the Program.ini. eSignatureOffice is simply reset to default settings (including the licence!), which is basically the demo version.
    • Inform user: By choosing this setting, the user is informed upon application start, when a manipulated file has been detected. As with the previous option, all options are reset to default settings, too (again, including the licence), but in contrast to the next option, eSignatureOffice is still usable. 
    • Do not start eSignatureOffice: If you choose this setting, you are blocking the user completely from using the whole application in case of a manipulated Program.ini. This means, that eSignatureOffice will have to be re-installed on the system.
    Require a password to use old generation of devices

    With this option, you can activate the password request feature for older devices (prior to the naturaSign devices) before the user is able to use these pads.

    Disable signature confirmation dialogue (disables digital signature creation inside the pad)

    Activating this option, makes the so-called "hash-dialog" disappear, which normally is shown after each signature on your signing device as well as in eSignatureOffice. This dialog is used to confirm the performed signature.

    If this dialog is activated, the digital signature is created within the pad's own software with the pad's own security certificates. Without hash-dialog, the digital signature is created by eSignatureOffice and the whole signing process is sped up, because there is one less user interaction.

    This setting has no influence on the encryption of the signature biodata and so is not critical in terms of data security. However, please be aware, that there will be no pad security certificate available to be shown when the signature is checked later, for example in Adobe.

    Check file integrity after signing

    This option makes eSignatureOffice avouch the integrity of all signatures in the whole signed document by checking all digital certificates of each and every included signature.

    Check embedded signature image

    With the help of this option, eSignatureOffice checks after a signature, if it contains enough image data to be displayed at all. For example does this prevent a signature from being added, if the signing colour has been set to "white" and so with a white document background, in the end nothing would be seen anymore.

     

     

    ...

     

    Timestamp

    In this menu, you can make eSignatureOffice include your signatures with a time stamp to prove the exact time of the signature. For this, StepOver provides an independant time stamp server.

    Image Added
    Click here to protect the settings below with a password.This button is available in all cathegories of the administration and allows to set a password to protect your settings from getting changed. You can do this for each menu separately or for all menus at once.

    Embed time stamp after signing

    If this option is activated, after capturing your signature but before adding it to the document, eSignatureOffice will send a request to the time server at the internet address in the given field to provide the exact time and will ad this information to the signature data. This feature allows to provide a secure, non-manipulatable reference point to verify the exact time of signing, no matter where in the world a document is signed. If you don't have access to the internet on the used computer, it would be wise to deactivate this option to speed up the whole signing process. Otherwise, the sent request will need a while to time out.

    Time server address

    In case you want to use another time server than the one provided by StepOver to ensure the time, enter its address here.

    However, please be aware, that this has to be a TSA (Time Stamping Authority) server according to the RFC 3161 standard. Due to technical reasons, other time server variants are currently not possible to use.

    Do'nt show warning message if the time server is unavailable

    If your access to the internet (and so your access to a time server) is varying, it might be useful to activate this option. This way, the signing process isn't slowed down in case the time server cannot be contacted. If this is the case, the local system time will be used for the time stamp.

     

     

    ...

     

    Certificate

    If you are using custom certificates in your company, you can configure your personal certificate here in this menu. Otherwise, the default StepOver certificates will be used.

    Image Added
    Click here to protect the settings below with a password.This button is available in all cathegories of the administration and allows to set a password to protect your settings from getting changed. You can do this for each menu separately or for all menus at once.

    Embed time stamp after signing

    If this option is activated, after capturing your signature but before adding it to the document, eSignatureOffice will send a request to the time server at the internet address in the given field to provide the exact time and will ad this information to the signature data. This feature allows to provide a secure, non-manipulatable reference point to verify the exact time of signing, no matter where in the world a document is signed. If you don't have access to the internet on the used computer, it would be wise to deactivate this option to speed up the whole signing process. Otherwise, the sent request will need a while to time out.

    Time server address

    In case you want to use another time server than the one provided by StepOver to ensure the time, enter its address here.

    However, please be aware, that this has to be a TSA (Time Stamping Authority) server according to the RFC 3161 standard. Due to technical reasons, other time server variants are currently not possible to use.

    Do'nt show warning message if the time server is unavailable

    If your access to the internet (and so your access to a time server) is varying, it might be useful to activate this option. This way, the signing process isn't slowed down in case the time server cannot be contacted. If this is the case, the local system time will be used for the time stampLoad from file

    With this button, you can load your own (personal oder company) certificate and so tell eSignatureOffice to use this certificate from now on for all your signatures. However, there are some important points about this:

    • the custom certificate has to be provided in a PKCS#12 container (learn more about this at https://en.wikipedia.org/wiki/PKCS_12)
    • in the submenu "Security & Key management", the option "Disable signature confirmation dialogue (disables digital signature creation inside the pad)" has to be enabled, because otherwise your custom certificate will be ignored and the default certificate of your sign pad will be used.
    • To keep up the security, you should never use personal certificates if you are using the multi-user feature.
    Clear

    This button deletes the loaded custom certificate from the eSignatureOffice settings and so all your signatures will be digitally signed with the default certificates, again.

    Password

    If your certificate file is encrypted, please provide your password here. With the small question mark button next to this text field, your entered password will be made visible.

    Public/Private key alias

    If there are multiple certificates in your PKCS#12 container-file, you can determine which of the certificates is to be used by providing the name (the alias) for the public key as well as the private key here.

     

     

    ...

     

    ...

    Import / Export settings

    If you are using custom certificates want to transfer all your settings to another installation (for example for a rollout in your company or a new setup of your system), you can configure your personal certificate here in this menu. Otherwise, the default StepOver certificates will be used.

    ...

    easily do this by exporting and re-importing all your eSignatureOffice settings or only parts of them. The export compiles all your settings in a single file. The import restores all saved settings. This way you could also make sure, that all users have the same configuration on their systems.

    Image Added
    Click here to protect the settings below with a password.This button is available in all cathegories of the administration and allows to set a password to protect your settings from getting changed. You can do this for each menu separately or for all menus at once.
    Load from file

    With this button, you can load your own (personal oder company) certificate and so tell eSignatureOffice to use this certificate from now on for all your signatures. However, there are some important points about this:

    • the custom certificate has to be provided in a PKCS#12 container (learn more about this at https://en.wikipedia.org/wiki/PKCS_12)
    • in the submenu "Security & Key management", the option "Disable signature confirmation dialogue (disables digital signature creation inside the pad)" has to be enabled, because otherwise your custom certificate will be ignored and the default certificate of your sign pad will be used.
    • To keep up the security, you should never use personal certificates if you are using the multi-user feature.
    Clear

    This button deletes the loaded custom certificate from the eSignatureOffice settings and so all your signatures will be digitally signed with the default certificates, again.

    Password

    If your certificate file is encrypted, please provide your password here. With the small question mark button next to this text field, your entered password will be made visible.

    Public/Private key alias

    If there are multiple certificates in your PKCS#12 container-file, you can determine which of the certificates is to be used by providing the name (the alias) for the public key as well as the private key here.

     

     

     

    Import / Export settings

    If you want to transfer all your settings to another installation (for example for a rollout in your company or a new setup of your system), you can easily do this by exporting and re-importing all your eSignatureOffice settings or only parts of them. The export compiles all your settings in a single file. The import restores all saved settings. This way you could also make sure, that all users have the same configuration on their systems.

    Image Removed
    Click here to protect the settings below with a password.This button is available in all cathegories of the administration and allows to set a password to protect your settings from getting changed. You can do this for each menu separately or for all menus at once.
    Export

    Pressing this button opens the dialog to export your eSignatureOffice settings. This dialog will be explained right after explaining the other options of this menu.

    Import

    Here you can choose an already available configuration file (*.scs = StepOver Configuration Set) in order to import the settings saved therein. After choosing the file, a menu will appear which looks like the export menu and which will be explained below.

    Enable Export/Import menu (under Options | Export/Import settings)

    With these two checkboxes, you can make both the Export and Import buttons be available in the main user interface in the "Options" menu. Otherwise, importing or exporting is only available via this administration menu oder by using parameters.

    Inform user if SSS folder is changed

    If this option is activated, the user will get feedback when importing a configuration file with a path for the signature set file, which cannot be created (for example because the destination folder protected by the operating system due to security settings). In this case, the default path for signature sets will be used (C:\Users\[username]\Documents\StepOver\SignatureSets).

    Benutzer informieren wenn FTP Verzeichnis geändert wird

    If this option is activated, the user will get feedback when importing a configuration file with a path for the FTP connection data file, which cannot be created (for example because the destination folder protected by the operating system due to security settings). In this case, the default path for FTP sets will be used (C:\Users\[username]\Documents\StepOver\FTPSets).

     

    The import/export menu

    If you are using the possibility to export all your eSignatureOffice settings combined in a single file or if you want to import this data from an earlier installation or another user, the following menu will appear after pressing the "Export" button or after loading the chosen configuration file (*.scs) via the "Import" button. 

    Image Removed

    The first half of the menu (all lines, which start with "Settings...") include all your settings from each of these administration submenus.

    Here you can separately save and transfer all your choices, checkboxes, folders etc. or respectively apply these settings to your system upon import. Please be aware, that some options are by default not exported nor imported, because they are deemed to be too system- oder user specific. This includes mainly file paths, which you can still choose manually. More about this in the following explanations:

    The signature-set files include all your signature-sets from the currently chosen signature-set folder. These files will be added to the SCS-file upon export and during the import they will be reproduced to your own signature-set folder, or - if you have chosen the option to do so (see below) - they will be reproduced to the signature-set destination path saved within the SCS-file:

    The FTP-set files include all your signature-sets from the currently chosen FTP-set folder. These files will be added to the SCS-file upon export and during the import they will be reproduced to your own FTP-set folder, or - if you have chosen the option to do so (see below) - they will be reproduced to the FTP-set destination path saved within the SCS-file:

    When exporting, the path to the signature-set files is always the currently chosen path ("main menu | Tools | Set signature-set folder..."). When importing, this path will be read from the configuration file, set as your default path and if necessary, the destination folder will be created.

    When exporting, the path to the FTP-set files is always the currently chosen path ("main menu | File | Open from FTP or Save to FTP"). You can find the default destination path option next to the "Edit" button. When importing, this path will be read from the configuration file, set as your default path and if necessary, the destination folder will be created.

    Just like the destination paths, your currently chosen FTP-connection will also be assumed to be the default FTP-connection. This connection can be exported and imported as well.

    The path to your temporary files folder can be setup in the administration submenu "General", but this path will not be saved to the configuration file by default when exporting those settings.

    The last point is about the Stamp History, which can be activated in the administration submenu "General | Stamp". Due to privacy protection reasons, this option is not exported by default. Learn more about stamps and the stamp history here here.

     

     

     

    Network

    In this menu, you can choose how eSignatureOffice should handle the connection to the internet. This includes, amongst others, the connection to FTP server and proxy settings.

    In this drop down menu, you can choose the encryption protocol, which shall be used for secure data transfer via internet. Learn more about SSL/TLS at Transport_Layer_Security (Wikipedia).
    Image Removed
    Click here to protect the settings below with a password.This button is available in all cathegories of the administration and allows to set a password to protect your settings from getting changed. You can do this for each menu separately or for all menus at once.
    Passive FTP mode

    Some systems may require to activate the passive FTP mode, for example when a firewall is restricting the access to the connected FTP server. If you are not sure, please contact your IT consultant or administrator.

    Verify uploaded files by downloading them again

    If you want to make sure, that your file upload to the FTP server was successful, you can choose this option to verify the uploading by downloading the saved documents afterwards.

    Path to FTP-set files

    Here, you can define the default path for your FTP-set files, which you can save in the "Open from FTP" dialog. This path will then be used as default path, when you want to select a FTP-set in a macro or to connect to a server in the "Open from FTP" dialog.

    Proxy settings HTTP

    With this checkbox and the following 4 text fields, you can set the IP, port, user name and  the password for your HTTP proxy connection.

    Proxy settings FTP

    With this checkbox and the following 4 text fields, you can set the IP, port, user name and  the password for your FTP proxy connection.

    Use Internet Explorers settings

    By activating this option, the connection and access data will be read from your Internet Explorer settings, if there are any available.

    Error handling | Upload attempts:

    This is the number of uploading attempts you want the system to make to transfer documents to a FTP server or via HTTP upload (with a macro) over the internet. This option can be helpful with a slow internet connection.

    SSL | Method

    at once.
    Export

    Pressing this button opens the dialog to export your eSignatureOffice settings. This dialog will be explained right after explaining the other options of this menu.

    Import

    Here you can choose an already available configuration file (*.scs = StepOver Configuration Set) in order to import the settings saved therein. After choosing the file, a menu will appear which looks like the export menu and which will be explained below.

    Enable Export/Import menu (under Options | Export/Import settings)

    With these two checkboxes, you can make both the Export and Import buttons be available in the main user interface in the "Options" menu. Otherwise, importing or exporting is only available via this administration menu oder by using parameters.

    Inform user if SSS folder is changed

    If this option is activated, the user will get feedback when importing a configuration file with a path for the signature set file, which cannot be created (for example because the destination folder protected by the operating system due to security settings). In this case, the default path for signature sets will be used (C:\Users\[username]\Documents\StepOver\SignatureSets).

    Benutzer informieren wenn FTP Verzeichnis geändert wird

    If this option is activated, the user will get feedback when importing a configuration file with a path for the FTP connection data file, which cannot be created (for example because the destination folder protected by the operating system due to security settings). In this case, the default path for FTP sets will be used (C:\Users\[username]\Documents\StepOver\FTPSets).

     

    The import/export menu

    If you are using the possibility to export all your eSignatureOffice settings combined in a single file or if you want to import this data from an earlier installation or another user, the following menu will appear after pressing the "Export" button or after loading the chosen configuration file (*.scs) via the "Import" button. 

    Image Added

    The first half of the menu (all lines, which start with "Settings...") include all your settings from each of these administration submenus.

    Here you can separately save and transfer all your choices, checkboxes, folders etc. or respectively apply these settings to your system upon import. Please be aware, that some options are by default not exported nor imported, because they are deemed to be too system- oder user specific. This includes mainly file paths, which you can still choose manually. More about this in the following explanations:

    The signature-set files include all your signature-sets from the currently chosen signature-set folder. These files will be added to the SCS-file upon export and during the import they will be reproduced to your own signature-set folder, or - if you have chosen the option to do so (see below) - they will be reproduced to the signature-set destination path saved within the SCS-file:

    The FTP-set files include all your signature-sets from the currently chosen FTP-set folder. These files will be added to the SCS-file upon export and during the import they will be reproduced to your own FTP-set folder, or - if you have chosen the option to do so (see below) - they will be reproduced to the FTP-set destination path saved within the SCS-file:

    When exporting, the path to the signature-set files is always the currently chosen path ("main menu | Tools | Set signature-set folder..."). When importing, this path will be read from the configuration file, set as your default path and if necessary, the destination folder will be created.

    When exporting, the path to the FTP-set files is always the currently chosen path ("main menu | File | Open from FTP or Save to FTP"). You can find the default destination path option next to the "Edit" button. When importing, this path will be read from the configuration file, set as your default path and if necessary, the destination folder will be created.

    Just like the destination paths, your currently chosen FTP-connection will also be assumed to be the default FTP-connection. This connection can be exported and imported as well.

    The path to your temporary files folder can be setup in the administration submenu "General", but this path will not be saved to the configuration file by default when exporting those settings.

    The last point is about the Stamp History, which can be activated in the administration submenu "General | Stamp". Due to privacy protection reasons, this option is not exported by default. Learn more about stamps and the stamp history here here.

     

     

    ...

     

    Network

    In this menu, you can choose how eSignatureOffice should handle the connection to the internet. This includes, amongst others, the connection to FTP server and proxy settings.

    Image Added
    Click here to protect the settings below with a password.This button is available in all cathegories of the administration and allows to set a password to protect your settings from getting changed. You can do this for each menu separately or for all menus at once.
    Passive FTP mode

    Some systems may require to activate the passive FTP mode, for example when a firewall is restricting the access to the connected FTP server. If you are not sure, please contact your IT consultant or administrator.

    Verify uploaded files by downloading them again

    If you want to make sure, that your file upload to the FTP server was successful, you can choose this option to verify the uploading by downloading the saved documents afterwards.

    Path to FTP-set files

    Here, you can define the default path for your FTP-set files, which you can save in the "Open from FTP" dialog. This path will then be used as default path, when you want to select a FTP-set in a macro or to connect to a server in the "Open from FTP" dialog.

    Proxy settings HTTP

    With this checkbox and the following 4 text fields, you can set the IP, port, user name and  the password for your HTTP proxy connection.

    Proxy settings FTP

    With this checkbox and the following 4 text fields, you can set the IP, port, user name and  the password for your FTP proxy connection.

    Use Internet Explorers settings

    By activating this option, the connection and access data will be read from your Internet Explorer settings, if there are any available.

    Error handling | Upload attempts:

    This is the number of uploading attempts you want the system to make to transfer documents to a FTP server or via HTTP upload (with a macro) over the internet. This option can be helpful with a slow internet connection.

    SSL | Method

    In this drop down menu, you can choose the encryption protocol, which shall be used for secure data transfer via internet. Learn more about SSL/TLS at Transport_Layer_Security (Wikipedia).

     

     

    ...

     

    E-Mail

    This menu allows you to define, how sending emails in eSignatureOffice is to be handled. These settings are used for the manual sending of mails via tool bar as well as sending mails automatically with the help of macros.

    Image Added
    Click here to protect the settings below with a password.This button is available in all cathegories of the administration and allows to set a password to protect your settings from getting changed. You can do this for each menu separately or for all menus at once.
    Automatic selection of mail clients

    This is the default setting. Using this option, your computer will be searched for installed e-mail software and then this software will be called in the order, which is shown in the menu here. By default this order is:

    1. Outlook

    2. Thunderbird

    MAPI

    This is the Windows Mail API and this means, that eSignatureOffice will send out a default command to your Windows operating system to start the current default mail program. As Microsoft updates and changes these functions sometimes, this option is prone to possible problems.

    Command line parameter call to mail client

    Here you can edit the default call of your mail client (e.g. Outlook or Thunderbird) if you know the neccessary parameters. It's also possible to create your own parameter call. We recommend this option only to experienced users, who know exactly, what they are doing.

    SMTP Server

    With this option, you can use your own email server to send mails from eSignatureOffice. If you don't know the neccessary information, your IT department might be able to help you.

    Test

    Use this button to test your current settings by creating a test email. In case you currently have no document opened, which could be attached to this test mail, a new dialog will be shown, in which you can select a file to be used for this test.