Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »


Setup for SImpleSigner over TCP Network

In order to work with SimpleSigner over TCP network you need a client software which is called ServerSONet and Simple Signer.
ServerSONet will be started on the computer where the pad is connected to. SimpleSigner will be started with the net- parameter in order to connect to the given Client. 



Using SimpleSigner over TCP Network

net- This parameter defines TCP address and port of the remote client.

Address and port should be entered directly after the net- parameter.


ServerSONet Parameter

-n, --hostname = (hostename/IP address)specify IP address or host name
-p, --port=(service/port)specify port number or service name

-a, --auto-accept=(seconds)

delay for a specific amount of seconds for auto accept of signature after signing on the pad is completed
-g, -- no-guirun the program without a GUI
-b, --gui-aboverun the program with the GUI always on top (may not work always)
-v, --versionshows the version of ServerSONet
-h, --helpshows the help list
  • No labels