Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Hardware Plattform

G12
Update to Firmware7.08A.0.51
Downloadhttps://www.stepoverinfo.net/download.php?file=g12_Update-7.08A.0.51.zip

Steps:

  • download the Firmware Updater
  • if the device has Firmware 5.x or 6.x you need to start the Update_from_Firmware_5or6.bat
  • if the device already has Firmware Version 7 you need to start the Update_from_Firmware_7.bat
  • after the Update there should be the message that Update was successful and the Pad will show Firmware 7.08E in the bootscreen

In case of Problems: 

  • in case the update fails try to repeat the update
  • if the pad is without firmware (display stays black and the LED blinks green), you need to run Update_from_Bootloader(recovery).bat
  • if you have a pad which is reebooting all the time, use the for_rebooting_device.bat
  • in case the update fails with the error which include "crypt wrong?" you are using the wrong updater Version, contact our support (service@stepover.de) for help
  • No labels