Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Hardware Plattform

G12
Update to Firmware7.08A.0.51
Downloadhttps://www.stepoverinfo.net/download.php?file=g12_US_Update-7.08A.0.51.zip

Steps:

  • download the Firmware Updater
  • if the device has Firmware 5.x or 6.x you need to start the Update_from_Firmware_5or6.bat
  • if the device already has Firmware Version 7 you need to start the Update_from_Firmware_7.bat
  • after the Update there should be the message that Update was successful and the Pad will show Firmware 7.08E in the bootscreen

In case of Problems: 

  • in case the update fails try to repeat the update
  • if the pad is without firmware (display stays black and the LED blinks green), you need to run Update_from_Bootloader(recovery).bat
  • if you have a pad which is reebooting all the time, use the for_rebooting_device.bat
  • in case the update fails with the error which include "crypt wrong?" you are using the wrong updater Version, contact our support (service@stepover.de) for help
  • No labels